FPGA / DSP/ Wireless Technology

Radio Frequency Products

Radiometrix offer an extensive selection of low power radio products suitable for high-reliability, performance critical applications. Our proprietary radio modules are optimised for maximum range and low power requirements.

  •  12.5kHz, 25kHz Narrow Band & Wide Band FM
  • Transmitters, Receivers, Transceivers & RF Modems
  • Single-channel and Multi-Channel operation
  • 151, 169, 173, 433, 458, 868 & 914 MHz
  • UHF & VHF ISM bands
  • FCC Part 90 Compliant, FCC Part 15 compliant
  • Class 1 performance
  • Encoders & Decoders for RF remote control
  • Radio Packet Modems
  • Radio Packet Controllers
  • Evaluation Kits
  • Accessories – Antennas & Connectors

The CTA88 chip is a simple encoder/decoder for use with ISM band telemetry modules. It permits a simple, one way wireless link to be established, for simple remote control applications, with a minimum of effort and no customer software input.
These TX and RX application boards are designed to allow easy evaluation of the CTA88 device in elementary jobs. They provide a simple 8 channel implementations, using either LMT/LMR or BiM footprint wireless radio modules

Features
8 bit address and 8 bit data select switches
8 relays to control mains powered devices
rated up to 8A, 250VAC/30VDC
Visual indication of valid code received and active relays
RF module range testing
8 Push buttons for momentary control of relays
Momentary, Latched outputs
Dynamic relay state changes
Setup is simple as Plug-and-Play
RF Remote Control Demonstration

This Universal Evaluation Kit can be used to evaluate single frequency Radiometrix VHF/UHF transmitter, receiver and transceiver modules. LED indicators are provided to show system status and to facilitate range testing and site surveys. The board is controlled by the Eval-RPC chip and incorporates several useful diagnostics & debug modes. Link-selectable 9.6kbps or 64kbps data rate
Features
Range Testing
Target Environment Testing
Noise and Interference Identification
Antenna Evaluation
TX1(H)/HX1/RX1, NTX2/NRX2, TX2(A)/TX2H/RX2(A), TX3A/RX3A, BiM1T/ BiM1R, CVR1, BiM/1/2/3A and NiM2 hardware test
Transient Analysis
Communication Eye Diagrm
Analogue and digital data transmission
Received Signal Strength Indicator (RSSI) meter
Linking external hardware directly or via on board Eval RPC
Responses up to 9.6kbps (A) or 64kbps (F)

For more products and information, please goto  http://www.radiometrix.com