Hitec HUMANOIDS
Robotics is proud to announce ROBONOVA-I. This exciting humanoid robot offers educators, students and robotic hobbyists a complete robot package.The stable ROBONOVA-I can walk, run, do flips, cartwheels, dance moves and once programmed, is ready to compete in any Robo One Class “J” competition.
You may purchase your RoboNova from us one of two ways, as a kit, so you can enjoy building your robot yourself, or as a pre- assembled, “RTW”, “ready to walk” instant gratification robot. The kit version may be assembled in 6 to 8 hours using only a screwdriver.
This fully articulating, 12" high, mechanical man is controlled with 16 powerful HSR-8498HB digital servos built specifically for the ROBONOVA-I by Hitec. These custom servos feature “set pin” locking of the servo arms for easy assembly, over-voltage current protection, super strong Karbonite gear trains and “feedback” technology for simple programming.
The control board is the heart of the ROBONOVA-I. Secured to the back of the robot under a strong plastic case, the control board can operate up to 24 servos and 16 accessory modules. Optional devices will eventually include gyro's, acceleration sensors, speech synthesis modules and operational devices such as Bluetooth controllers and R/C transmitters and receivers.
This flexible and sophisticated interface allows the user to customize ROBONOVA-I into the robot of their dreams.
The Megarobtoics HUMANODIS
MGR-R201 
is a fully assembled Humanoid Robot constructed using AI1001 modules.
The MCU used on the MGR-R201 is an ATMEL ATmega128 and may be programmed with AVR Studio. AVR Studio is not supplied with the MGR-R201 but may currently be downloaded from Atmel.
MGR-R201 includes:
17 AI1001 modules,
ATMEL ATmega128 based MCU board,
NiMh Battery 2300mAh AA type, Thermal Shutdown, 3x2 array rechargeable battery,
1 power supply,
RS232 cable,
ATMEL ISP programming lead,
all necessary brackets.
NB. A NiCd Battery Charger must be ordered separately, see the Accessories page.
ROBOTIS HUMANOIDS
Bioloid - Robotic Construction Kit 
The Bioloid Kit from Robotis is the first robotic kit based around "smart serially controlled servos" that allows the user to build multiple types of robots. As well as great hardware the GUI based software is freeware, i.e. educational institutions can install the software on multiple PC's. This kit is exceptional value and is ideally suited for hobbyists, schools & universities
The contents of the Bioloid kit is shown on the right, the main items included in this package are:
a CM-5 mcu (Atmel ATMega128),
18 AX-12+ Serially controlled servo's,
1 AX-S1 Sensor module,
Rechargeable battery pack (9.6V),
2 Programming Utilities (freeware),
a Switch mode Power Supply,
Serial Cable (9pin D-type),
an assortment of frames (over 100),
wheels & tyres, and
spacers, bushings, nuts & bolts.
FUTABA HUMANOIDS
Futaba RBT-1 Human Robot
Already assembled and equipped, the Futaba robot needs only one more component to be complete: You to give the orders. You'll use the included, game-style controller to execute pre-programmed routines or those you program yourself with the supplied Motion Editor for your Windows¨ PC. The robot's 20 servos Ð four more than similar 'bots Ð are directed by FASST 2.4GHz radio signals rather than "TV remote" IR technology. The electronics for its flexible 16-channel operation (and a rechargeable, high-capacity, 7.4V Lithium Polymer battery) are located in the torso for easy access. LED "eyes" add to the humanoid appearance Ð and a self-righting function makes sure Futaba's robot never lays down on the job.
Features
-Fully assembled and controlled by 20 small servos, RPU-11 Processing Unit and RRC-T11 controller.
-RPU-11 Processing Unit with rotary switch to change modes such as Edit Mode (to make and edit motions with Motion Editor) Automatic Mode (to play motion inputted automatically) Operating Mode (to control robot with wireless controller) and much more.
-Tri-Axial Acceleration Sensor allows robot to distinguish posture to ground in order to get up from falls and more.
-3D CG Motion Editor software allows viewing robot motions on Windows PC, motions can be created by moving mouse or inputting numbers no programming needed, various settings allow setting the behavior with output of sensors, key assignment of controller and more.
-Basic motion such as walking pre-inputted into the Motion Editor allowing original operation by editing sample motion.
-Eleven RS301CR high torque metal gear servos control mainly leg movement.
-Nine lightweight RS302CD servos control upper body movement.
-Game pad type controller with wireless 2.4GHz technology can be "paired" to the robot so that instruction from other controllers is not accepted. This allows up to 16 controllers to be used at once.
-One year limited warranty
Tomy I-SOBOT Robot
There's no shortage of fun with the amazing i-SOBOT, the World's Smallest Biped Tomy Robot. Packed with over 200 words and phrases, and more than 200 pre-programmed movements, this robot can do everything from saying goodbye to dancing the hula. Recommended for kids aged 10 and up, the i-SOBOT is ready to rock 'n' roll right out of the box. A very Simplae and basic robots for all robotic enthusiast.
WowWee Robosapien V2 Robot
From the designer of Robosapien and Roboraptor, Mark Tilden has now released a new generation robot! This new improved robot has all the original features of the Robosapien and a whole wad more! It stands 10" taller than the original Robosapien, making it 2 foot tall! And it can even talk, not just to you, it can also command the Roboraptor and the Robopet
ASHykim 
is a 21DOF robot bear, capable of both bipedal and quadrupedal movement.
ASHykim is based around Robotis's RX-64 & RX-28 Dynamixel modules and a Compulab CM-iGLX 500MHz AMD Geode based mcu
Hykim is one of the world's most advanced commercially available robots. Hykim was originally designed in response to RoboCup's call for a Standard Robotic Platform, information on our proposals (July 2007) can be viewed here.
The design philosophy used to produce Hykim was that Hykim would be an Open Development Platform, all necessary documentation will be available to anyone purchasing Hykim.
Specifications:
Height: 600mm
Width (across shoulders): 260mm
Weight: 5.0kg
Degree's of Freedom: 21
Actuator Type: RX-64 & RX28
Control modules:
HyInt (AMD Geode 500MHz mcu),
ATMega128 in head, &
ATMega128 in body.
Wireless Comms:
WiFI, 802.11g
Assortment of sensors
11.1V LiPo rechargable battery
